Engineered Hardwood Installation

What Is Engineered Hardwood Flooring?

When hearing the term “hardwood flooring,” most people think of solid wood planks. However, engineered wood floors are far more common in homes and businesses than solid wood floors. The popularity of engineered wood flooring is due to its affordability, durability, and other advantages.

Engineered wood floors have a solid wood surface you can refinish multiple times. Below this top surface, you’ll find up to seven layers of criss-cross plywood and other materials resistant to moisture damage and temperature fluctuations. If you want an authentic hardwood appearance but with minimal risk of warping, this flooring type might be your best option.

 

How to Install an Engineered Hardwood Floor

Follow the steps below to install engineered hardwood flooring yourself:

  1. Prepare the subfloor: After removing your old flooring, clean the subfloor thoroughly by removing all staples and nails, then sweep and vacuum the surface. You should also wash the subfloor using a mild vinegar solution.
  2. Attach tar paper sheets: Cover the subfloor with tar paper sheets and fasten them using a staple gun. The tar paper serves as a moisture barrier, protecting the flooring against rot.
  3. Remove the boards from all boxes: Ideally, you want to distribute all color variations across the entire floor surface. Instead of installing all the planks from a box in one area, open all boxes and install all boards in random order to avoid patches of color.
  4. Install floor planks: The floor planks should be parallel to the room’s longest wall, and the plank lengths of two adjacent rows must differ to ensure staggered seams. Slide tongue-and-groove planks into each other before fastening them to the subfloor.
  5. Install thresholds and baseboards: Cover the seams between the floor and the wall by attaching a baseboard along the bottom of the wall. Lastly, install a threshold in the opening between the room and hallway floors.

 

How to Clean Engineered Hardwood Floors

After installing your new flooring, you can clean it using a mop and a multi-surface floor care product.

 

Preparation Tips for Installing Engineered Hardwood Flooring

With thorough planning, you can reduce the disruption of a new floor installation to your household. Follow the tips below to prepare for your engineered hardwood installation project:

  • Give yourself enough time to complete the installation. If necessary, plan the project over a weekend or during your leave of absence.
  • Plan to leave a walking strip so that people don’t need to walk over the new floor during the first 24 hours after installation. Once the finished section can withstand foot traffic, finish installing the remainder of the new floor over the temporary walkway.
  • To save time, inspect all floorboards for signs of warping or other defects before the installation project.
  • To prevent interruptions, gather all necessary equipment before starting the installation. If you are glueing the boards down, you will need cleaning gloves and a notched trowel. Also, ensure that you have the proper protective equipment, including eye protection.

 

How Much Does It Cost to Install Engineered Hardwood Floors?

Various factors determine engineered hardwood installation cost, including the floorboard specifications, wood type, and floor area. On average, the cost of installing engineered hardwood flooring ranges between $2,000 and $7,000, with the average price per square foot ranging from around $2.60 to $3.50.

Labor is another critical consideration. Generally speaking, labor amounts to around 50% of your total floor installation costs. Some contractors charge an hourly fee, making it difficult to draw up an accurate budget. Ideally, your contractor should provide a rate for the entire installation project.

 

Methods of Installation 

Three methods for installing engineered hardwood flooring are:

  • Staple/nail down: This method involves stapling the floorboards to the subfloor at a 45-degree angle at eight-inch intervals. If you don’t have DIY experience, this method might be challenging.
  • Glue down: Gluing the floorboards to the subfloor with an adhesive is an effective and relatively easy installation method. If you have a concrete subfloor, apply an epoxy membrane below the planks to prevent moisture damage.
  • Floating: Most professionals recommend the floating method for first-time installers of engineered hardwood flooring. This installation method relies on the boards’ weight to keep them in place. You’ll need to apply PVA glue between the boards.  

 

Make Your Home a Perfect Dream Home With Carpet To Go

At Carpet To Go, we commit to providing property owners in Bellevue, WA, with high-end engineered hardwood flooring and installation services. Our waterproof engineered-hardwood flooring will establish a warm and welcoming atmosphere in your home, while the natural surface will enhance your interior’s aesthetic appeal.

To learn more about our Carpets To Go service options and engineered hardwood installation prices, please call us today at 425-440-3307 in Bellevue, WA.

 

Our Other Flooring Products

Get a Free Estimate!

    Serving Bellevue, Seattle, and Surrounding Areas in Washington State. Come on in!