How To Install Vinyl Plank Flooring

  • December 23, 2021

When planning a home remodeling project, you want to focus on cost-effective projects that will make the most significant difference in improving your space and increasing your property’s value. Thanks to its affordability, durability, and aesthetic appeal, installing new vinyl plank flooring is a popular option to consider. 

This guide from the team at Capet To Go in Bellevue, WA, provides: 

  • Tips for installing vinyl plank flooring
  • The tools for installing vinyl plank flooring
  • The potential costs of an installation project

Steps for Installing Vinyl Plank Flooring

Follow the steps below to install vinyl plank flooring: 

  1. Plan the floor plank layout: Decide in which direction the vinyl floor planks will lie. Ideally, the planks should run parallel to the longest or most prominent wall.
  2. Remove trim and doorcase moldings: Carefully remove the base shoe moldings and floor trim running along the bottom of the wall.
  3. Prepare the subfloor: Fill all cracks, holes, and depressions, ensuring a level surface. You also need to sweep and vacuum the subfloor to remove all dust.
  4. Lay the first row of planks: Place the first full plank on the floor at the center of the longest wall. Then, place cut-off planks on either side of the first plank.
  5. Attach the flooring planks: You can easily attach vinyl planks by sliding the tongue of one plank into the groove of another.
  6. Make protrusion cuttings: The floor layouts of rooms, such as bathrooms, are usually not perfect squares or rectangles. When encountering protrusions, such as a toilet or basin stand, make cuttings using heavy-duty scissors.
  7. Fit planks to protrusions: After making a protrusion cut, slide the cut plank’s tongue into the adjacent board’s groove while keeping the plank at an upward angle. When the cut-out is in line with the protrusion, place the plank flat on the ground to lock it in place.
  8. Reinstall the doorcase and trim moldings: Refit the trim and baseboards using a brad nailer after installing all the planks.

How to Install Vinyl Plank Flooring on Concrete

The processes for installing vinyl plank flooring on concrete and plywood flooring are essentially the same. When preparing the subfloor, use a concrete patcher to fill any holes.

How to Install Glue-Down Vinyl Plank Flooring

Installing glue-down vinyl plank flooring is similar to installing tongue-and-groove vinyl planks. Follow the steps below to install glue-down flooring: 

  1. Smooth the subfloor. Fill the grout lines using a leveling compound when installing the vinyl planks over an existing tile floor. 
  2. Sweep and vacuum the subfloor or tiles to remove debris and dust particles, then remove all baseboards and trims. 
  3. Start laying planks from the center of the floor. Apply adhesive to the subfloor in the area where you are ready to lay the vinyl planks, then press the planks to the floor to ensure a durable bond.

How to Install Vinyl Plank Flooring on Stairs

Vinyl plank flooring is ideal for stairs as it can withstand heavy foot traffic without thinning or breaking. To install vinyl plank flooring on stairs, follow these steps: 

  1. Prepare the stairs by removing all molding and trims, leveling all bumps, filling all dents, and cleaning the entire surface. 
  2. Measure the vertical stair surfaces and the flat surfaces or treads. Don’t assume all treads and risers have the same dimensions. 
  3. Make vinyl cuttings for each surface and attach them using nails or adhesive.

How Much Does It Cost to Install a Vinyl Plank Flooring?

How much to install vinyl plank flooring? Your installation costs will depend on various factors, including:

  • The installation method
  • The need to remove the existing floor
  • The floor size you want to cover
  • The removal and disposal of underlayment, old flooring, and other materials 

The average labor cost of a new vinyl plank flooring installation is around $36 per hour. Some contractors charge an installation price per project, making planning and budgeting easier.

Tools to Install Vinyl Plank Flooring

The tools you need to install vinyl plank flooring include: 

  • A sander to level a plywood subfloor
  • A flat pry bar to remove the trim and baseboards
  • Pliers to remove nails from the subfloor
  • Cutting tools, including a fine-tooth saw and utility knife
  • Measuring tools, such as a tape measure, straightedge, and carpenter’s square
  • A nail set, fasteners, and a hammer
  • A pneumatic brad nailer for trim, baseboard, and molding reinstallation

Make Your Dream Home a Perfect Home With Our Team at Carpet To Go

Vinyl plank flooring is waterproof, easy to maintain, and durable, with realistic visuals to ensure an authentic-looking interior. At Carpet To Go, we are a leading supplier and installer of vinyl plank flooring in Bellevue, WA. If you are looking for a cost-effective remodeling solution, we can help. To request a quote, please contact us today at 425-440-3307.

Get a Free Estimate!

    Serving Bellevue, Seattle, and Surrounding Areas in Washington State. Come on in!